ACUT-60 /100 /120

ACUT-60 /100 /120

ACUT series is designed for professional use in heavy duty application. ACUT power source can be used for manual cutting with HF ignition to provide best arc start and avoid defect in arc start process. ACUT series can show best result for cutting steel with thickness up to 35 mm.

Output t34.png  t33.png       Input t39.png  t41.png       Process t27.jpg  

Materials t45.png t46.png t47.png t48.png                            t11.jpg  t15.jpg


  • Inverter technology provides a low weight power source that can beeasily maintained or carried by the welder

  • ACUT is air cooled power source to provide a non-stop work

  • ACUT provides cutting of steel, stainless steel, copper, aluminum etc

  • Self diagnostic and different protections help in work and maintainpower source

  • Post flow function gives additional cooling for plasma torch

  • Smart fan feature greatly expands working life of the fan and reducesfault rate


Technical Specification

  ACUT60 ACUT100 ACUT120
Rated input voltage/frequency (V/Hz) 3 phase, AC380V±10%, 50 /60Hz
Rated input capacity (KVA) 7.5 14.4 16.5
Rated input current (A) 11.4 21.9 25
Duty cycle (40℃) 60%@60A 60%@100A 60%@120A
OCV (V) 319 319 340
Output current rang (A) 30-60 30-100 30-120
Arc ignition method HF contact HF pilot HF pilot
Maximum cutting thickness (mm) 15 30 35
Clean cut thickness (mm) 1-8 1-12 1-18
Air pressure (Mpa) 0.45-0.6
Protection class IP21S
Insulation class H
Dimension (mm) 501*232*495 576*297*557 576*297*557
Weight (kg /lb) 28.5 /63 43.2 /95.4 43.5 /96.1



ACUT 60 100 120.jpg




Standard Equipments

  • 1 Power source

  • 1 Connected primary cable L=3m

  • 1 Ground cable L=3m

  • 1 Pressure-reducing valve

  • 1 Plasma torch